--19 years professional manufacturing experience;(Kinmore Motor is a DC Motor manufacturer and exporter ever since 1998.)
--Dual quality control system from examining engineers and inspecting machines;
--Product kinds are various, and more than 130 kinds
--2 factories, 900+ employees and 90 million pcs annual capacity;
--Active in more than 60 countries;
--Output in 2013:60 million pcs;
--Any customer complaint will be resolved within 7 days;
--ISO/TS 16949:2009 and ISO 9001:2008 certificated factories
--Continuously focus on customers' needs and products improvement.
1. Production Lines
2. Inspection instruments
4 Production FLow
Inspection occurs throughout the whole process flow; Unitizing Hexagon CMM,X-ray Spectrometer, MEA motor performance testing system, Tension tester, Torque tester, Motor performance testing system and other geometrical testing equipment, we perform a battery of inspections from tooling, material to finished products as below,
-Material lot acceptance inspection
-Material life test
-First article inspection
-100% inspection to key process and motor electric performance
3.1. General Service:
All enquiry or email be replied in 12 hours, no delay for your business.
Questions about products will be replied professionally, exactly, best advice to you.
Short Lead time
Sample or small order sent in 15-25 days, bulk or customized order about 30-35 days.
T/T, Western Union, Paypal, L/C, etc, easy for your business.
Take photos, send to customers for confirmation. Only confirmed, can be shipped out.
Besides English, you can use your own language by email, then we can translate it.
3.2. Customization Service:
OEM and customization are available
Ball Bearing in Output Side
High Degree of Protection
Small Mechnical Time Constant
Resist Intense Vibrations
Zero Axial Gap
Low noise Design
Fast Response(Small Tm)
High Torque at a Low Speed
Penolic Resin Base Commutator
Epoxy Coating Armature
Light Weight and Long life
Q: What kind motors you can provide?
A: For now, we mainly provide permanent magnet brushed dc motors (including vibration motors, low voltage dc motors and high voltage dc motors) with diameter range in 6~52mm and also Dia10~80mm size gear motors. But we also provide a few shaded pole AC motors which are not shown on our website.
Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval. But it's also okay for us to accept smaller lots like a few dozens, hundreds or thousands for the initial 3 orders after sample approval. FOr samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.
Q: Could you send me a price list?
A: For all of our motors, they are customized based on different requirements like lifetime, noise, voltage, and shaft etc. The price also varies according to annual quantity. So it's really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we'll see what offer we can provide.
Q: Are you motors reversible?
A: For all the low voltage dc motors, they are reversible (when you exchange the electrical poles, they can run in another direction). For the high voltage dc motors, if clients only need to run the motor in one direction, we'll shift the brushes by some small angle in reference to the permanent magnet (brush offset). That can favor the required one direction of rotation, but the other direction has higher sparkling and worse performance. The stall torque for the favor rotation will be less, but the max. Efficiency point will be higher.
Q: Is it possible for you to develop new motors if we provide the tooling cost?
A: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we'll make our evaluation to see if we can arrange or not.